Skip to main content
SyncVeloSyncVelo

Utilities & energy

Crews, remote sites and connected assets in one place

Follow field crews and service vehicles live, watch substations and pump stations on camera, and bring meters and pumps in over MQTT or HTTP with IoT OS, with commands that will need approval before they reach the field.

  • Crews live on the map
  • Remote-site cameras live
  • Meter telemetry today
  • Approval for risky commands, planned
Book a demoTalk to an expert

The products

The SyncVelo products behind it

What each product does here, and how far it is: Available is built, Next is being built now, Roadmap is planned.

The challenge

What gets in the way today

  • Crews and vehicles spread over a wide area
  • Remote sites visited only to check that all is well
  • Meters and pumps read by hand or in separate systems
  • Remote commands that could cause harm without a second check

Field crews

Available

Crews and their vehicles, live

Crew vans and service trucks on the live map, geofences around substations and pump stations, speeding and idling rules, and maintenance by distance, engine hours or days.

  • Generators and pumps with a tracker: fuel level, engine hours and voltage as calibrated sensors
  • Alerts by email, SMS, WhatsApp and push
  • Service plans, work orders and cost per km

Telemetry

Available

Meters, pumps and substations, connected

IoT OS takes telemetry from meters, pumps and sensors over MQTT and HTTP, with history and charts, and their alarms raise alerts by email, SMS, WhatsApp and push. LoRaWAN for battery-powered meters follows.

  • MQTT 5 over TLS, with credentials for each device
  • Latest values, history and alerts per device
  • LoRaWAN, CoAP and LwM2M on the roadmap

Commands

Roadmap

Remote commands, with a second pair of eyes

Commands that can cause harm will need an approval and a safe-state check before they reach the field, every one audited, and firmware will roll out in signed, staged updates with automatic rollback.

  • Desired and reported state for each device
  • Approval and safe-state checks for risky commands
  • Signed firmware with staged rollouts

How it fits together

From the field to the control room

Fleet, Vision AI, and IoT OS's telemetry and alerts today, with the rest of IoT OS as it is delivered.

  1. 01

    Fit vehicles and generators

    Trackers report position, fuel, engine hours and voltage.

  2. 02

    Connect site cameras

    Substations and reservoirs, live in the browser.

  3. 03

    Bring meters online

    MQTT and HTTP first, low-power networks later.

  4. 04

    Command safely

    Approval and safe-state checks before anything moves in the field.

Every capability

Everything on this page, each with its status

Statuses come from SyncVelo's product plan, and a label changes only when its delivery is done. Filter to see what you can use today.

Available
Available
Built and in service today.
Next
Next
Being built now, or straight after.
Roadmap
Roadmap
Designed and scheduled; not built yet.

Fleet

  • Available

    Crew vehicles, live

    Live map, trips, history and replay.

  • Available

    Geofences around sites

    Substations and pump stations, with entry and exit alerts.

  • Available

    Generator sensors

    Fuel level, engine hours and voltage as calibrated sensors.

  • Available

    Fuel fills and drains

    Fills, drains and consumption per vehicle or generator.

  • Available

    Maintenance

    Service plans by distance, engine hours or days.

IoT OS

  • Available

    Console and account

    IoT OS's own console on the SyncVelo account.

  • Available

    Device types

    Templates for meters, pumps and sensors.

  • Available

    MQTT and HTTP ingest

    MQTT 5 over TLS, credentials per device.

  • Available

    Telemetry and alerts

    Latest values, history, charts and alerts.

  • Roadmap

    Twins and safe commands

    Approval and safe-state checks for commands that can cause harm.

  • Roadmap

    Firmware over the air

    Signed images, staged rollouts and automatic rollback.

  • Roadmap

    LoRaWAN, CoAP and LwM2M

    Low-power networks for battery-powered meters.

  • Roadmap

    Modbus and OPC UA gateways

    Existing equipment through edge gateways.

Vision AI

  • Available

    Remote-site cameras

    Any maker's cameras, live in about a second.

  • Available

    Your own media server

    Video stays on your network.

  • Available

    Recording

    Recording, playback and signed evidence export.

  • Roadmap

    Intrusion alerts

    Intrusion and line crossing at remote sites.

  • Roadmap

    Smoke and flame

    An early warning beside certified fire alarms, never instead of them.

  • Roadmap

    Edge box

    Local recording and AI, riding through outages.

Drive AI

  • Available

    Driver scores

    Harsh driving and speeding scored per driver.

  • Roadmap

    Dash cams

    Live view, event clips, and the camera's own alarms.

Frequently asked questions

Can SyncVelo read our meters today?

Yes, meters that send over MQTT 5 or HTTP: IoT OS shows their latest values, history and charts, and their alarms raise alerts by email, SMS, WhatsApp or push. LoRaWAN, CoAP and LwM2M are on the roadmap.

What can we use today?

SyncVelo Fleet for crews and vehicles, including generators and pumps fitted with a tracker, Vision AI's live view and recording of site cameras, and IoT OS for meters and pumps over MQTT or HTTP.

How will remote commands be kept safe?

Commands are planned with permissions, approval for those that can cause harm, safe-state checks and an audit trail.

More industries

Retail & shopping centresSmart cities & public safetyManufacturing & industrial IoTSecurity, facilities & campuses

Get started

Ready to move your world smarter?

See how SyncVelo can power your fleet, your partner business or your next integration. Personal walkthrough, real devices, your use case.

Book a demoStart free trialContact sales